DIY Epoxy Resin River Table (Full Tutorial)

Rate this post

In this DIY tutorial, I show you how to make a DIY epoxy resin river table using live edge wood. Also, learn various tips and techniques.

In fact, I use these epoxy river table pro tips and woodworking techniques on custom furniture for my clients.
Even if you don’t need an epoxy resin river table, the techniques covered in this DIY tutorial can be directly translated toward other epoxy or woodworking projects.
So, let’s dive right in with a full DIY video tutorial and the tools I used.

Video Tutorial: DIY Epoxy Resin River Table

There are several things which are difficult to fully explain with words and images, so be sure to check out the video tutorial below!

Tools I Used

DIY Project Plans
Table Top Epoxy Resin
Resin Glow Powder
Chisels
Fire Glass
HairPin Table Legs
UV Light Strip
Micro Butane Torch
Tack Cloth
Mixing Sticks
CA Glue
Hot Glue Gun
Shellac
Heat Gun
Silicone Caulk
Wax
Gloves XL

Often times, I experiment with many different products and tools while working with epoxy resin and wood.
Therefore, the products I use in a certain project may not be my favorite.

For your convenience, I’ve compiled a complete list of the best epoxy resin for river table projects.

Epoxy Wood Table

So, what makes this epoxy resin river table unique?

Glow in the Dark Table

For starters, it contains blue resin glow powder to make the resin river glow in the dark with no lights.

DIY Glow in the Dark Epoxy Table

Embedded Objects in Epoxy Resin

Additionally, I embedded blue fire glass in the epoxy resin to add some cool effects. More on this later..

resin river table embedded fire glass
resin river table epoxy pour

Sinker Cypress Live Edge Wood

The third characteristic that makes this river table unique is the sinker cypress wood.
Sinker Cypress is a rare and beautiful wood.
The unique grain patterns, color variations, durability, and history make sinker cypress wood tables popular among woodworkers and consumers.

epoxy-resin-river-table-glowpowder_20171016_04

I love working with live edge sinker cypress wood for dining tables, desks and entryway tables.
Unfortunately, the price of sinker cypress prevents me from using this wood more often.
The piece of live edge sinker cypress I used in this resin river table project was 48″ long and roughly 20″ wide.

DIY Plans: Epoxy Resin River Table with Live Edge Wood

I created a set of downloadable DIY plans for this project and it includes:

  • 82 page PDF
  • Tool List
  • Material List
  • Resin Calculator
  • Woodworking Tips & Techniques
  • Full Companion Video of Build

Clean Live Edge Wood

First, I removed the bark on the live edge of the sinker cypress slab.

The epoxy resin will not adhere properly to loose bark on a live edge.
I peeled away the loose pieces with my old chisel that I recently resharpened.

Next, I used a rubber mallet and chisel to remove the bark I couldn’t peel off.
Then, I smoothed the surface as much as I could without damaging the live edge.

Epoxy-Resin-River-Table_2
epoxy-resin-river-table-glowpowder_20171016_03

Preparing Live Edge Wood Slab

I milled the sinker cypress live edge wood slab to get straight sides, a flat surface, and square ends.

Table Saw Jointing Jig

To start, I ripped the sinker cypress in half with my table saw jointing jig.
Obviously, the live edge on both sides of the wood slab prevented me from using the table saw fence.

First, I located the middle of the board by reading the grain pattern and measuring the front, middle, and back.

epoxy-resin-river-table-glowpowder_20171016_04

Next, I secured the sinker cypress to the jig using the dovetail clamps, raised my table saw blade, and slowly pushed it through.
Then, I verified the sides were straight by putting them against each other.

epoxy-resin-river-table-glowpowder_20171016_05
epoxy-resin-river-table-glowpowder_20171016_06
epoxy-resin-river-table-glowpowder_20171016_07

Flat Wood Surface

I ran the sinker cypress through my planer and removed 1/64″ with each pass.
Also, my hardwood dealer ran this wood through his planer.
As a result, I did not need to remove too much material to get a flat surface.
Next, I used my orbital sander with 120 grit sandpaper to remove the loose debris from each live edge.

epoxy-resin-river-table-glowpowder_20171016_08
epoxy-resin-river-table-glowpowder_20171016_09

Square Ends

I secured the straight side of each piece of sinker cypress to my miter saw fence and cut each end.

epoxy-resin-river-table-glowpowder_20171016_10

Melamine Epoxy Resin Mold

I had a few scraps of melamine left from previous projects.
So, I used this to create the melamine resin mold.

How to Make a Mold for Epoxy River Tables

First, I used a piece of melamine that was long enough for the sinker cypress.
Next, I layed the live edge wood and traced it with a pencil.

epoxy-resin-river-table-glowpowder_20171016_11

Then, I removed the live edge sinker cypress from the melamine.

Apply vaseline or furniture wax on resin mold to serve as a release agent for epoxy.

epoxy-resin-river-table-glowpowder_20171016_12

Seal Resin Mold

First, I placed the 2 pieces of sinker cypress back on the melamine.
Then, I lined them up with the pencil marks to ensure each end was the same length.

Next, I used hot glue to seal each end of the resin table.
I used silicone to seal the bottom of each live edge (length wise) to prevent the epoxy resin from seeping through.

epoxy-resin-river-table-glowpowder_20171016_13
Epoxy resin river table silicone caulk
epoxy-resin-river-table-glowpowder_20171016_151

How To Keep Epoxy from Leaking

Sometimes, epoxy leaks despite my best effort to prevent it from doing so.

For this project, I decided to make the underside of my table saw outfeed table as a tub to catch leaking epoxy resin.
Obviously, it’s not pretty but it works.
The underside of the table simply has 5 12″ 2×4 pieces which protrude vertically to hold pieces of various size
Ultimately, this prevents epoxy from leaking on my floor.


epoxy resin river table melamine resin mold

Glow in the Dark Epoxy Resin River Table

I wanted this epoxy resin river table look like the other table for matching/decorative purposes, but I also wanted it to be unique.

So, I decided to add glow powder, or photoluminescence powder, to the base epoxy resin layers.
As a result, the river bottom would glow from the river bottom through the fire glass.

Blue Epoxy River Table

I chose a blue glow powder to resemble the blue ocean.
To avoid a potential disaster, I tested the glow powder to verify the color before mixing it with epoxy resin.
It would be really BAD if I had the wrong color!

I purchased the glow powder from Art N Glow.
Art n Glow included a black light with my purchase, which I used to verify the color of the powder.
The glow powder is charged by UV light, sunlight, or black light.

epoxy-resin-river-table-glowpowder_20171016_18

What is the Best Epoxy Resin for River Tables

The best epoxy resin for river tables is deep pour epoxy such as Liquid Glass 2.0.

Table Top Epoxy

For this epoxy resin river table, I used ProMarine Table Top Epoxy because I had plenty left over.
However, Pro Marine only allows pours of roughly 1/4″ thick.
As a result, multiple pours are required which causes 2 issues:

  • Prolongs the project b/c multiple pours are required.
  • Increases the chances of making a mistake.

Best Deep Pour Epoxy

For thick epoxy pours, I recommend using SuperClear Liquid Glass Epoxy Resin.
This deep pour epoxy allows up to 4″ pours.
Deep epoxy pours save time and reduce the amount of epoxy mixing needed for projects.

How To Mix Epoxy Resin

I mixed 24 ounces of epoxy resin (12 ounces of hardener and 12 ounces of resin) per the manufacturer’s instructions which can be located on their website.

Next, I used a stir stick until the epoxy resin turned cloudy white.
It is important to stir the mixture and scrape the sides of the mixing cup.
Do NOT whip while stirring because it causes LOTS of bubbles.

epoxy-resin-river-table-glowpowder_20171016_19
epoxy-resin-river-table-glowpowder_20171016_20
epoxy-resin-river-table-glowpowder_20171016_21

Then, I added 2 ounces of blue glow powder.

epoxy-resin-river-table-glowpowder_20171016_22

How Much Glow Powder for Resin River Table?

First, art n glow recommends 1 part glow powder to 4 parts epoxy resin.

Obviously, they are aggressive with this recommendation.
After all, they want their product to perform well.
And, they like selling more glow powder.
I feel a 1 to 4 ratio is too much for a few reasons:

  1. Too much glow powder may jeopardize the epoxy resin mixture. I don’t have any proof of this, but it just seems logical to me from my experience with epoxy resin.
  2. Glow powder is not terribly expensive, but it isn’t cheap.
  3. I don’t want a bright glow; rather, I prefer a subtle glow.

A 1 to 12 ratio produces a medium glow and a 1 to 6 ratio works for a bright glow.

DIY Epoxy Resin River Table Pour

To start, I slowly poured the epoxy resin in the epoxy resin river table.

epoxy-resin-river-table-glowpowder_20171016_23
epoxy-resin-river-table-glowpowder_20171016_24

Remove Epoxy Air Bubbles

Next, I removed the bubbles and worked the material with a heat gun.

The heat gun blew material in the epoxy resin.
I forgot to wipe the table with a tack cloth before pouring the material.

epoxy-resin-river-table-glowpowder_20171016_251
epoxy-resin-river-table-glowpowder_20171016_26

So, I decided to use my micro butane torch to remove the remaining bubbles.

epoxy-resin-river-table-glowpowder_20171016_27

Second Epoxy Pour

After 24 hours, I mixed another 24 ounces of epoxy resin and 2 ounces of glow powder for the second pour.
This is the same mixture as the first pour and the same process.
However, I didn’t use the heat gun this time.

epoxy-resin-river-table-glowpowder_20171016_28
epoxy-resin-river-table-glowpowder_20171016_29
epoxy-resin-river-table-glowpowder_20171016_30
epoxy-resin-river-table-glowpowder_20171016_31

I am comfortable mixing 24 ounces of material in a single mixture due to the size of my container and mixing stick.

Sand Epoxy River Table

Normally, I perform sanding at the end of my project.

I sanded at this point in the project.
The sandpaper grits I used was 80 grit, 100 grit, 120 grit, 150 grit, 180 grit and 220 grit.


epoxy-resin-river-table-glowpowder_20171016_33

I knew I needed to sand more at the end, but only finish sanding (220 grit).
Keep in mind, Sinker Cypress is rather soft.
So, it doesn’t require sanding with low grits.
Once I sanded through all the grits, I wiped the wood with a damp cloth to raise the grain.
Then, I sanded with 220 grit one more time.
I used my air compressor to remove the loose debris.

epoxy-resin-river-table-glowpowder_20171016_35
epoxy-resin-river-table-glowpowder_20171016_36

Third Epoxy Resin Pour

The mixture of the third pour was exactly the same as the previous 2 pours.
I waited 24 hours after the second pour, used 24 ounces of epoxy resin, and mixed 2 ounces of glow powder.

Next, I decided to use the heat gun to move the epoxy resin around a bit since this pour was rather thick.
I removed the debris in the previous step so it was safe to use the heat gun. 😉

epoxy-resin-river-table-glowpowder_20171016_37
epoxy-resin-river-table-glowpowder_20171016_38
epoxy-resin-river-table-glowpowder_20171016_39

Test Epoxy Glow Powder

I decided to test the glow powder with a black light while it was curing in the epoxy resin river table.

Additionally, I recommend using this black light to test glow powder.
To do this, I simply shined the UV black light directly on the glow powder for roughly 10 seconds.
As I mentioned previously, the light charges the resin table glow powder.

epoxy-resin-river-table-glowpowder_20171016_40
epoxy-resin-river-table-glowpowder_20171016_41
epoxy-resin-river-table-glowpowder_20171016_42
epoxy-resin-river-table-glowpowder_20171016_43

I knew I was done with the glow powder after this simple test.
Moreover, It was not my goal for the glow powder to shine bright.

Ultimately, I wanted more of a gentle glow, which is why I didn’t use the 4:1 ratio as recommended by Art n Glow.

How to Charge Epoxy Glow in the Dark Table

I decided to purchase a UV black light in order to manually charge the glow powder during the day.
Since the table would be indoors and in a part of the house with very little sunlight, I knew the glow powder wouldn’t get an adequate charge.

Next, I tested the black lights when they arrived and they worked perfectly.

epoxy-resin-river-table-glowpowder_20171016_44

Embedding Objects in Epoxy Resin River Table

I used fire glass on this table because it will be placed in the same room as the previous LED Epoxy Resin River Table I built a few months back.

The fire glass is rather dusty out of the bag, so I cleaned the glass with water in a bucket.
Next, I put the fire glass in a towel overnight to dry.
I poured the fire glass in the epoxy resin river table and spread it evenly across.
Then, I used a carpenter square to make sure the fire glass sat below the surface.

epoxy resin river table embedded fire glass
epoxy-resin-river-table-glowpowder_20171016_47

Fourth Epoxy Resin Pour

The fourth epoxy resin pour was the same as the first 3 pours with two minor differences:

  1. No Glow Powder
  2. Mixed 2 24 ounce batches instead of one.

First, I mixed both 24 ounce batches in separate containers.

Next, I poured the first 24 ounces and removed the bubbles with my mini butane torch.

Then, I immediately poured the last 24 ounces and made sure I got the epoxy resin level with the top of each piece of wood.
I removed the bubbles in the same manner as the first 24 ounces.

resin river table epoxy pour
resin river table epoxy pour

Finally, I let the epoxy resin cure for 48 hours.
Afterwards, I turned off the lights and I was surprised at how bright the river table glowed in the dark.

epoxy-resin-river-table-glowpowder_20171016_51

Remove Epoxy River Table Mold

I really created more work for myself on my previous sinker cypress LED table.
Ultimately, a ton of epoxy resin leaked between the wood and melamine.
Not only did it waste epoxy resin, but I also made it more difficult to remove the melamine.
So, I implemented a few improved techniques on this table.

  1. First, I sealed the bottom of the wood with silicon caulk.
  2. Second, I sealed the both ends of the table with hot glue.

In short, I sealed this epoxy resin river table as best as I could and It was SO WORTH IT.

epoxy-resin-river-table-glowpowder_20171016_0001

The melamine removed VERY easily.
Also, I used a rubber mallet and my utility pry bar.
There was virtually no epoxy resin to scrape from the underside of the table.
I used my chisel to remove the excess silicon and hot glue from the underside of the epoxy river table.

epoxy-resin-river-table-glowpowder_20171016_53
epoxy-resin-river-table-glowpowder_20171016_54
epoxy-resin-river-table-glowpowder_20171016_55

Sand Resin Table Underside

First, I sanded the underside of the table with 80 grit, 120 grit, and 220 grit.
Next, I used my air compressor to remove the remaining debris.


epoxy-resin-river-table-glowpowder_20171016_57

Square River Table

Although I squared the ends of the table in a previous step, I did it again.
Why?
Because I needed the live edge river table to be 2 inches shorter in length. 😉

I measured 1” from each with my combination square and marked a straight line with a ruler.
Next, I used my straight edge and circular saw to square each end.

epoxy-resin-river-table-glowpowder_20171016_58
epoxy-resin-river-table-glowpowder_20171016_59
epoxy-resin-river-table-glowpowder_20171016_60
epoxy-resin-river-table-glowpowder_20171016_61

Epoxy UV LED Light to

The UV black lights are meant to be attached with the lights facing down.
However, I need the lights to face up (towards the table) in order to charge the glow powder for the epoxy resin river table.
First, I used CA glue to attach the UV black lights to the underside of the river.
The epoxy resin is cloudy, so the marks the CA glue made were not visible.
I had enough length in the string to make 3 wraps.
One wrap on the outside, back on the other side, and last one in the middle.

Next, I turned off the lights in my workshop to show the look of the epoxy river table with the UV Black Lights On.
Then, I turned the UV Black Lights off and the glow powder shined perfectly through the fire glass.
At least in my opinion it was perfect. 🙂

epoxy resin river table glowing in the dark with no lights
epoxy-resin-river-table-glowpowder_20171016_71

Best Epoxy River Table Finish

Obviously, there are many ways to finish an epoxy resin river table top.
In fact, it’s downright confusing especially for DIY weekend warriors.
So, I decided to write an article on my favorite epoxy wood table top finishes.

best finishes for epoxy river table
resin river table finish

Epoxy River Table Bottom (Table Legs)

Finally, it was time to attach the table legs to the epoxy resin river table.
Also, I used the same hairpin legs as I did on my previous table in order for them to match.

Before I was able to attach the legs, I had to remove a lot of rust from them.
I used Boeshield Rust Remover.
Additionally, I use this rust remover for many of my tools.

epoxy-resin-river-table-glowpowder_20171016_86

Next, I attached them to the bottom of the live edge river table by marking pilot holes, drilling pilot holes, and attaching screws.

epoxy-resin-river-table-glowpowder_20171016_87
epoxy-resin-river-table-glowpowder_20171016_88
epoxy-resin-river-table-glowpowder_20171016_89

My dog (Belle) was hanging out in my shop with me and she doesn’t like the table.
Additionally, she kept growling and scooting (quick run with her butt down) away from the table.

epoxy-resin-river-table-glowpowder_20171016_90
epoxy-resin-river-table-glowpowder_20171016_91

Glow in the Dark Epoxy Table

Here are 3 pictures of the resin table in different modes.
In the first picture, the UV black LED lights are on.
As I mentioned, the UV black LED lights charge the glow in the dark table.

epoxy resin river table UV lights charging glow powder

Furthermore, the picture below shows the glow in the dark epoxy table glowing with the UV lights off.

epoxy resin river table glowing in the dark

Also, the glow in the dark table fades over a period of time depending on the amount of charge and the light source.
For example, natural sunlight charges the photoluminescent powder better than artificial UV black lights.

epoxy-resin-river-table-glowpowder_20171016_94

Final Thoughts – DIY Epoxy Resin River Table with Live Edge Wood

I’m really happy with the way this epoxy resin river table turned out.
Even though it looks very similar to my other sinker cypress table, it stands out in a unique way by glowing in the dark.
I hope you learned how to make an epoxy resin river table.

  • Live Edge Outdoor Epoxy Table
  • Epoxy River Rock Table
  • Seashell Epoxy Table
  • DIY Walnut Epoxy Dining Table

Additionally, I have a 25% off discount code for my subscribers.
Click HERE to get the discount code and download a set of DIY plans today.

Frequently Asked Questions

The amount of resin needed for a river table can be determined by using the following formula: Quarts Needed = Volume(Cubic Inches)*0.017316.

The best epoxy resin for a river table is a deep pour epoxy. Deep pour epoxy can be poured up to 4″ thick which reduces the number of epoxy pours to make a river table.

The cost to make an epoxy river table can range from $250 to $5,000 depending on factors such as size and species of wood.

A river table should be at least 1.5 inches thick.

You are viewing this post: DIY Epoxy Resin River Table (Full Tutorial). Information curated and compiled by Kayaknv.com along with other related topics.

LEAVE A REPLY

Please enter your comment!
Please enter your name here