Changing a Trailer Tire: 2 of 2

Rate this post

Part 2 of 2:

After reading, Quic Must-Haves for Changing a Trailer Tire, you should be safely over to the side of the road. Now you are ready to embrace your inner pit crew skills and get back on the road before you lose daylight!

Gather Tools

Gather all of your tools before removing the tire. This way, you can be sure you have everything you need! Check back to the Quic Must-Haves for Changing a Trailer Tire for a checklist. Remove your spare as well, and place it near your work station.

Loosen Nuts

Once you have your tools, start with slightly loosening the nuts on the tire with the tire iron. It will be easier to loosen the nuts while the tire is still on the ground because there is resistance from the weight of the trailer. Be careful you only loosen them a little bit, you still have to bring your trailer onto the jack!

Next, drive the trailer slowly onto the trailer jack. Make sure you are communicating with your team (if they are with you) to avoid injuries! Continue loosening the nuts until you can pull the tire and wheel straight out from the bolts.

Trailer Tire

Double Check

Double check the axel, wheel well and wiring, to ensure there was no damage from the blown tire. Once you have checked, mount the spare tire onto the bolts, and twist the nuts to hold it in place.

Star-Like Pattern

Tighten the nuts as much as you can with the tire iron, alternating in a “star-like” pattern. This will even out the wheel on the axel, which will help avoid another blowout or wobbling.

And You are Off!

Now, you are ready to drive the trailer slowly off of the jack, and perform a final tightening of the nuts! Make sure you check your trailer lights and your horses before driving off to the nearest tire shop!

Most Frequent Cause of Blowouts

Typically, the answer is improper inflation. It is important to check the tire pressure while the tire is cold. If you check it after you have been traveling, then you will not have an accurate reading because the friction from the asphalt and rubber causes the tire to heat up. Once you check the pressure, fill your tires to the recommended level, not the maximum level!

Another cause of tire blowouts could be overheating. This is caused by the molecules vibrating, and when the molecules vibrate, they expand. The constant friction on the tires is a recipe for heating and expanding!

Testing Tires Before you get on the Road

To avoid a blowout, because let us be honest here, that is a headache no one wants to add to the list, routinely check your tire treads with a coin. This will help you see the depth and wear on the tires. If the treads are shallow or flush, then you have waited too long to purchase new ones!

Clean up after the Farrier

We all know how nails can get in the nooks and crannies of the driveway or in the barn. Pay special attention while sweeping and blowing the barn to avoid nails in the driveway! They can puncture your tires and it may go unnoticed until the next time you are driving.

We hope this helps you be prepared if you ever run into some trouble! Have you had a trailer tire blowout, and if so, what did you do? Send us a message and we would love to hear your stories!

You are viewing this post: Changing a Trailer Tire: 2 of 2. Information curated and compiled by Kayaknv.com along with other related topics.

LEAVE A REPLY

Please enter your comment!
Please enter your name here